Secomax™ CH2540
03:15

High performance PCBN Grades for hard part turning 

CH2540 was launched in SECO NEWS 2016-1 and is a completely new grade for H25, interrupted cuts, but also for mixed operations with both interrupted and continuous cuts.


The new CH2540 has bimodal grain size distribution, where fine grained cBN (1 µm) with 15 µm grains added to the structure. One advantage of this type of structure is the crack deflection that the coarser grains cause.

By causing cracks to deflect, it takes longer time for the cracks to propagate from edge to edge resulting in less chipping. In a fine grain structure, the cracks moves around the fine grains, while the coarser grains in the new substrate structure cause the cracks to deflect around the coarser grains. This has the biggest effect in interrupted cuts.











For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.



Author:
Per Ola Jönander
Product Specialist SECOMAX PCBN/PCD/CERAMIC
SECO TOOLS AB
737 82 Fagersta, Sweden
Office +4622340818
Mobile +46703163555 email:perola.jonander@secotools.com
0 kommentarer

Secomax™ CH0550
00:24

High performance PCBN Grades for hard part turning 

CH0550 was launched in SECO NEWS 2016-1 and is a completely new grade for high cutting speeds in H05, continued cut application area.


The new and patent nanolaminate coating gives an extra wear resistance together with the new substrate which is designed to withstand crater wear at high cutting speeds and generate good surface finish.

In pure H05 applications gives the new CH0550 superior tool life compared with earlier recommended grades. See below application example.





For more information, please contact your local Seco representative, or our Advanced material (PCBN/PCD/CERAMIC) team.



Author:
Per Ola Jönander
Product Specialist SECOMAX PCBN/PCD/CERAMIC
SECO TOOLS AB
737 82 Fagersta, Sweden
Office +4622340818
Mobile +46703163555 email:perola.jonander@secotools.com
1 kommentarer